BSA SCRAMBLER

concours · Nov 23, 2022

TomU said:
Two purposes. Heat protection and supposedly to improve gas evacuation. Ceramic coating is a better alternative so it's purely aesthetics. Personally, i'd like it better with Titanium hi-risers

Trickle down from industrial use.
I was using it 43 years ago when mounting burners fed with 5" gas pipe, into thermal oxidizers.

https://www.unifrax.com/product/fiberfrax-cloth-tape-and-sleeving/

Fast Eddie · Nov 23, 2022

TomU said:
Two purposes. Heat protection and supposedly to improve gas evacuation. Ceramic coating is a better alternative so it's purely aesthetics. Personally, i'd like it better with Titanium hi-risers

Kinda Tom. Actually, if you were really serious about this temp thing, you’d do both. In fact you‘d do 3 things: ceramic coat the inside, ceramic coat the outside, and wrap.

But yeah, I’d also sooner see multi coloured Titanium pipes personally !

EstuaryBoy · Nov 23, 2022

The 'old' singles encouraged using bandages on your knee, if you weren't paying attention

Shelby-Right · Nov 23, 2022

I

baz said:
Bottom of a pair of jeans that are turned up
'Turnups '

Used to have those classic flared jeans in the 80s and no front chain guard on my Honda 250 it would munch up the flares , I pulled up at the lights one day and went to put my left foot down and fell over

.

baz · Nov 23, 2022

Shelby-Right said:
I

Used to have those classic flared jeans in the 80s and no front chain guard on my Honda 250 it would munch up the flares , I pulled up at the lights one day and went to put my left foot down and fell over .

I can remember my flares freezing solid in the winter
Must have looked a right twat when I got off the bike
Like a couple brookland cans hanging off my jeans

TomU · Nov 23, 2022

Fast Eddie said:
Kinda Tom. Actually, if you were really serious about this temp thing, you’d do both. In fact you‘d do 3 things: ceramic coat the inside, ceramic coat the outside, and wrap.

But yeah, I’d also sooner see multi coloured Titanium pipes personally !

Yeah, i'm used to heat. EGTs on my car get up to 1600F

For this bike, purely aesthetics

Onder · Nov 23, 2022

Well then maybe I better use that heat wrap on my beard....

Shelby-Right · Nov 23, 2022

I use a MGL avionics gauge ,relatively cheap , you can plug your K-type sensors straight in and most digital ones let you select how many sensors to read at the same time, less gets you a bigger font .

Matt Spencer · Nov 30, 2022

Works on 4 strokes too , if the unburned gas ignites in the pipes , like afterburners , it augments the thrust . And enhances the gas pulse extraction & ram chargeing effect .

Scrambler , O Rielly .

Some people think a Desrt Racer is a Street Bike .

If you put the megaphones over the stuff at the back there , it tidies it all up .

BSA SCRAMBLER

concours

Fast Eddie

EstuaryBoy

Shelby-Right

baz

TomU

1972 Roadster

Onder

Shelby-Right

Matt Spencer

Similar threads