What Did You Do With Your Commando Today?

Shelby-Right said:
My 76 Goldwing, still on 4 carbs, I have to do my clutch plates and upgraded springs, carbs are good, but they take some work, they don't like to sit. I am painting it in candy red soon and doing the new spokes and re anodized rims. View attachment 122083
Click to expand...
I do really like those plain Jane wings
They seemed really big when they came out, they seem to have shrunk over the years
 
Commando and stable mates seeking refuge as the waters rise … life at the seashore.
What Did You Do With Your Commando Today?

What Did You Do With Your Commando Today?

What Did You Do With Your Commando Today?

What Did You Do With Your Commando Today?

Pretty much tired of this Mother Nature crap …
 
I live near the beach front, well about 1km but am up high, my home town of Brisbane is built on wet lands/flood plains and low laying areas of Moreton bay and rivers, we have had our share of major floods in the time Brisbane has been settled, but people still want to live on or near the water and new estates are being built in areas that are flood prone thinking drainage systems will fix it, not and when it does flood the land developers have long gone and now insurance companies are charging insane high prices for flood cover that people can no longer afford to pay, I am glad my dad built on high ground looking over the bay.
Hope the water don't go higher for you Richard as high/flood water can do a lot of damage, and mother nature can be cruel when she is angry.
 
Richard Tool said:
Commando and stable mates seeking refuge as the waters rise … life at the seashore.
View attachment 122086
View attachment 122087
View attachment 122088
View attachment 122089
Pretty much tired of this Mother Nature crap …
Click to expand...
RT, when did that damage happen in your garage? Was it hurricane Sandy? It appears the homes across the street are newer and rebuilt. Probably with the utilities on the second floor. A buddy in Ventnor got hit with 6' of water on the ground floor.
 
NORTSTER1974 said:
RT, when did that damage happen in your garage? Was it hurricane Sandy? It appears the homes across the street are newer and rebuilt. Probably with the utilities on the second floor. A buddy in Ventnor got hit with 6' of water on the ground floor.
Click to expand...
Yes , that was Sandy . The detached garage is still at the same elevation but I lifted the house after Sandy .
 
Recently I posted a Thread : " Stripped spark plug hole . " . On good advice , off came the head and received my Time-sert kit . Kept going ( might as well.. ) , pulled barrels to find 2 scored up pistons with blowby evidence . Both pistons had rings that had migrated on their own so that the compression rings were very out of their correct placements . Why would that happen ? (Cam looks fine .) .
Today pulled the MK 111 primary ( looks good ) , to access the bottom end for removal . Got all 5 bolts out supporting it , until the 6 th upper subframe mount one . It won't come out from the weight on it .. ideas ?
 
Torontonian said:
Both pistons had rings that had migrated on their own so that the compression rings were very out of their correct placements . Why would that happen ?
Click to expand...
Do you mean the gaps were not where you placed them? That's normal as the rings can rotate.

Rotation of piston rings

Piston rings lead a much more active life than might be thought. While we usually imagine that they only reciprocate in a motion defined by the piston, they also rotate during service. Such rotation has been the subject of many experiments and studies over the years, but this is not simply a...
www.highpowermedia.com
"It is clear that whatever position the rings are in during the engine build will not be maintained during service."
 
The right piston ( T.S. ) compression rings were both with their gaps to the front face .
The left side piston rings had moved . The lower comp. ring gap to the left side .
Both pistons are scrap now , with wear to both front and rear faces on both sides and blowby evidence . Bores are visually good on both sides of the barrels ..
I've ordered in 2 new .040 over pistons ( replacements ) from Andover , here soon , to replace them , I'll get a barrel honing done at a local shop before fitting .
 
Torontonian said:
The cam lobes look fine , I'm trying to get the bottom end out of the bike now , held back by the top cradle bolt which is taking all the weight of it . I'll find some wood tomorrow , all on the street work .
Click to expand...
And here i complain because I don't have room for a lift! At least I have a lockable garage!
 
One of the welds on my right (Emgo) muffler had (some time ago) de-welded. There was no damage at all - and also no sign of a weld. I removed muffler and took it to Norton Club member who has a nearby welding shop. He did a beautiful job-no damage to chrome at all. Last week I reinstalled muffler. Today I had breakfast with some people and then went to a British car and bike show in a Very Upscale Neighborhood about 25 miles away. Norton is running great, but the primary case has started to leak. (It's a NORTON!)

The annual All Brit ride is about two weeks away. Plan to ride bike as is, by which time a new gasket should show up, and I will then pull the primary cover and figure out the problem.
 

Similar threads

Schwany
What did you do with your P11 today. he he
2 3 4 5
Replies
96
Views
9,313
Schwany
Schwany
Shelby-Right
What did you do with your Triumph today .
Replies
10
Views
1,675
Matt Spencer
M
CanukNortonNut
  • Locked
Ok what are you getting for mileage with your commando.
2 3 4 5
Replies
93
Views
15,187
CanukNortonNut
CanukNortonNut
V
What did you do to your Norton today?
2 3 4
Replies
67
Views
9,196
Richard Tool
Richard Tool
Back
Top