What year/model? What am I missing?


andover-norton.co.uk

Andover Norton Parts Drawings - Andover Norton Factory Parts - Commando Parts

Andover Norton Parts are the only Norton spare parts in the market manufactured to original drawings, within the factory-approved tolerances, from the correct materials, and with the correct finish.
andover-norton.co.uk andover-norton.co.uk

andover-norton.co.uk

Andover Norton Parts Drawings - Andover Norton Factory Parts - Commando Parts

Andover Norton Parts are the only Norton spare parts in the market manufactured to original drawings, within the factory-approved tolerances, from the correct materials, and with the correct finish.
andover-norton.co.uk andover-norton.co.uk

 
Last edited:
macvittiemotorcycles said:
This is one of the main changes I want to make sure I incorporate. Left side shift. Right side brake. Any pointers on what I need and how to get started getting all the bits needed for this?
Click to expand...
Converting left side shift to right side is easy.

Converting right side shift to left side is NOT so easy!
 
macvittiemotorcycles said:
Got it. Thanks so much. Not sparking a buying spree. I like the idea of looking for parts that are compatible but also upgrades as I do the rebuild. As long as they are Norton or British parts then I don’t mind if it isn’t 100% stock bike
Click to expand...
i'd go as cheap as possible to get up & running, or deep going over, then go from there, cheap borescopes allow a good quick look inside, plugs likely have a story

cheap whole jap (prob even newer britt) front ends abound, mostly way better than stock etc

ton of conversion/swap info out there

prob an easiest known quick swap, similar look, done awhile ago by gp is a yam xs650 front end
 
Last edited:
74ok said:
dunno when andover went with the red blocks for parts diagrams but doesn't work for me, at all
andover-norton.co.uk

Andover Norton Parts Drawings - Andover Norton Factory Parts - Commando Parts

Andover Norton Parts are the only Norton spare parts in the market manufactured to original drawings, within the factory-approved tolerances, from the correct materials, and with the correct finish.
andover-norton.co.uk andover-norton.co.uk
Click to expand...
Long ago and they work very well with every browser I've ever tried. What device are you using and what browser?
 
Prime example of why one should Always Check Andover First: the diaphram spring the Ebay seller wants $39 for is in stock at Andover, correct part for 68-70, for $58. Built to correct tolerances, no rust or other issues, and probably superior metallurgy.
 
nortonmargie said:
Prime example of why one should Always Check Andover First: the diaphram spring the Ebay seller wants $39 for is in stock at Andover, correct part for 68-70, for $58. Built to correct tolerances, no rust or other issues, and probably superior metallurgy.
Click to expand...
among other issues, maybe gone soft and or lost tension
 
marshg246 said:
Long ago and they work very well with every browser I've ever tried. What device are you using and what browser?
Click to expand...
don't like the maze of red blocks, each one obscuring the details behind it

taking out the red leaves a simple outline leaving most of the details

might as well be a standout eyesore as is, for what otherwise has been fab & the best

can't see why taking out the red would be a big deal then see what folks say

maybe a slight diff outline color, like grey vs blotchy/all over/littered with full red blocks, maybe just red outlines

just my 2c
 
Last edited:
T

Thread 'Alton starter motor kits - good?'

How good are the Alton starter motor kits? I'm aware of two alternatives (CNW and Norvil) but I've been offered an Alton kit, brand new, at a pretty good price. I know nothing about them other than what I've read on Facebook (which tends to be an unreliable source of information). Some say they're brilliant, others say they've given nothing ut trouble. Hence asking on here. If they do suffer from issues, what kinds of issues are they and can they be avoided somehow?
Also, do they come with a modified inner chaincase or does the original have to be modified? And is any modification of the...
74ok said:
been around awhile now, good bunch out there by diff Co,s
Click to expand...
macvittiemotorcycles said:
This is over board now. But I found that there is an estart conversion for earlier models

Click to expand...
 
74ok said:
don't like the maze of red blocks, each one obscuring the details behind it

taking out the red leaves a simple outline leaving most of the details

might as well be a standout eyesore as is, for what otherwise has been fab & the best

can't see why taking out the red would be a big deal then see what folks say

maybe a slight diff outline color, like grey vs blotchy/all over/littered with full red blocks, maybe just red outlines

just my 2c
Click to expand...
The detail behind it is simply the item number just like in the parts book. You click it and it takes you directly to the part. To me, it's the most valuable thing related to Norton - of course, that's just me.
 
here's a front disc/caliper option for a stock disc brake norton front end
What year/model? What am I missing?
 

Similar threads

D
Am I missing 2 washers from my Cylinder head ?
Replies
4
Views
458
DennisMo
D
O
What model do I have?
2
Replies
31
Views
3,161
B+Bogus
B+Bogus
S
What Tools Are Needed To Remove Atlas Clutch Hub?
Replies
3
Views
502
norton bob
norton bob
Denis J
Understanding the date range of serial numbers - What is the model year?
2
Replies
26
Views
4,743
L.A.B.
L.A.B.
YellowPeril
What tires will fit my stock WM2 rims?
Replies
10
Views
1,830
robs ss
robs ss
Back
Top