MK 3 airbox repair

[daveforty]

Daveforty, you could be a life saver what's the P and P to LN1 2DF what would be a suitable donation ? as long as there is no damage to the box I've got all the other bits attached to mine

I'll ask in the post office re. postage.

£25 to mid Wales air ambulance sound about right?

Wales Air Ambulance Charity | Saving Lives Across Wales

Wales Air Ambulance is a lifesaving charity providing rapid critical care across Wales. Learn how you can help save lives today.

www.walesairambulance.com

 

[markdenny]

I'll ask in the post office re. postage.

£25 to mid Wales air ambulance sound about right?

Wales Air Ambulance Charity | Saving Lives Across Wales

Wales Air Ambulance is a lifesaving charity providing rapid critical care across Wales. Learn how you can help save lives today.

www.walesairambulance.com

Morning I'll await price for P&P £25 to MWAA sounds good to me I'll get that sorted.

 

[daveforty]

P&P is going to be £16, I will have to get a box from the Post office and some bubblewrap packing. Post will be approx 3 days & tracked, so if it goes tomorrow, then you should have it by the weekend. I had another look at it, it should clean up nicely enough. All the thread inserts are good, but the foam filter element has disintegrated, I suppose it is 52 years old and has spent 40+ of them in a crate in the garage. I also notice that the back/bottom (inside end) of the plastic moulding is a little deformed, but it should push out OK, maybe with some hot water to soften the plastic.

e-mail your address to me at dave(dot)forty(at)
virginmedia(dot)com and I'll get it moving.

 

[markdenny]

P&P is going to be £16, I will have to get a box from the Post office and some bubblewrap packing. Post will be approx 3 days & tracked, so if it goes tomorrow, then you should have it by the weekend. I had another look at it, it should clean up nicely enough. All the thread inserts are good, but the foam filter element has disintegrated, I suppose it is 52 years old and has spent 40+ of them in a crate in the garage. I also notice that the back/bottom (inside end) of the plastic moulding is a little deformed, but it should push out OK, maybe with some hot water to soften the plastic.

e-mail your address to me at dave(dot)forty(at)
virginmedia(dot)com and I'll get it moving.

Email sent
Mark