Donald Pender front brake parts and specs

Steve_Norton said:

Did he happen to mention any part or model numbers?

Click to expand...

Dedubyah said:

those 6 pot Tokikos were used on early GSXR1000s

Click to expand...

Steve_Norton said:

Thanks, I supposed that is a Suzuki part. Wonder what the brake hydraulics are it was machined for Lucas switches ?

Click to expand...

ILLF8ED said:

I have Don’s master cylinder on my ‘72, but with original Lockheed caliper and brake disc. Use DOT4 brake fluid.

Click to expand...

Steve_Norton said:

No, thats is what I would like to know.

Click to expand...

Brake pads are for Tokico calipers as used on many Kaw and Suz models, thats why i chose this caliper.
The recommended brake fluid is stated on the mastercylinder cap (Dot 3)
For an overhaul kit ,of which you probably only need the 2 piston seals which are not the same,you could try a Honda dealer or brake mastercylinder shop .
I could post a kit but that will take a while.
Its a 1-1/2 round trip to the post office,not sure when i can get there.if you are in the US then i cant use the post office,they are not accepting parcels to the US

Click to expand...

willy mac said:

I took the master cylinder apart today to get some measurements to help try and identify the unit. I was looking on e-bay to see if I could find a seal kit and came across a replacement piston assy with seals and circlip that look identical to what I have. I've yet to get an answer back from Tourmax confirming the dimensions but they have a kit (MSB101) for the Honda CBF600.

Click to expand...