Donald Pender front brake parts and specs

[Dedubyah]

Did he happen to mention any part or model numbers?

those 6 pot Tokikos were used on early GSXR1000s

 

[Steve_Norton]

those 6 pot Tokikos were used on early GSXR1000s

 

[Steve_Norton]

Thanks, I supposed that is a Suzuki part. Wonder what the brake hydraulics are it was machined for Lucas switches ?

 

[willy mac]

I have Don’s master cylinder on my ‘72, but with original Lockheed caliper and brake disc. Use DOT4 brake fluid.

Have you ever found what bike the master cylinder was from? I've got a leak from the lever and need a seal kit.

 

[Steve_Norton]

No, thats is what I would like to know.

 

[willy mac]

No, thats is what I would like to know.

I took the master cylinder apart today to get some measurements to help try and identify the unit. I was looking on e-bay to see if I could find a seal kit and came across a replacement piston assy with seals and circlip that look identical to what I have. I've yet to get an answer back from Tourmax confirming the dimensions but they have a kit (MSB101) for the Honda CBF600.

 

[Steve_Norton]

Thanks, I think I will try madass 140@gmail.com again.

 

[Steve_Norton]

Just heard from Don Pender

Brake pads are for Tokico calipers as used on many Kaw and Suz models, thats why i chose this caliper.
The recommended brake fluid is stated on the mastercylinder cap (Dot 3)
For an overhaul kit ,of which you probably only need the 2 piston seals which are not the same,you could try a Honda dealer or brake mastercylinder shop .
I could post a kit but that will take a while.
Its a 1-1/2 round trip to the post office,not sure when i can get there.if you are in the US then i cant use the post office,they are not accepting parcels to the US

 

[willy mac]

I took the master cylinder apart today to get some measurements to help try and identify the unit. I was looking on e-bay to see if I could find a seal kit and came across a replacement piston assy with seals and circlip that look identical to what I have. I've yet to get an answer back from Tourmax confirming the dimensions but they have a kit (MSB101) for the Honda CBF600.

I think I may be getting confused with which master cylinder we're talking about here, my MS is being used with the standard Lockheed calliper, but I see mention of Tokico callipers so not sure of compatibility. Don has got back to me and sent me a Honda Part No for the master cylinder piston with seals 45530-KVY-911 costing £12.32.

 

[Steve_Norton]

The Tokico caliper is wht Don Pender sells in his kit. That is what I have. The Honda part for the Master cylinder looks to be the same as in his kit.