Power Commander V installed

C. Dolan said:
Bike has better idle and low end. Still cuts out at 7000 to 7500 rpm, but has not been dyno tuned , yet.
Will get that done this week or next.
Click to expand...
Yes get the Dyno done then you know the fueling is correct .
The ECU limiter will cut in somewhere in the 7-7500 rpm.
If you get a printout would be interested to see what the figures are :)

My next project is lose the airbox, install velocity stacks and see where the dyno is at , Make some side panels along the same lines as the airbox to hide the nasty cables.

Could get it them etched with " NVH Norton 961 Sport" ;):rolleyes::D

Cheers
Paul
 
Last edited:
Especially where Skinner reveals:

“It was a pretty significant evolution of the original
961 engine, because the motor was retooled almost
in its entirety. We have new crankcases, new
cylinders, a new cylinder head, new pistons, new
crankshaft, and a new gearbox, all in order to reduce
NVH [Noise Vibration and Harshness], and to
improve overall quality as a means of refining the
product..."
 
just fitted up a PC to a 2016 961CR & come up with an easy solution.
countersunk the front right corner air box bolt hole & installed a countersunk M6 bolt.
this allowed the module to sit flush on the bracket with the velcro strips.
swapped the PC TPS plug with the 961 TPS plug using all 3 wires.
dyno & tuned today & made it smooth & ride able bike.....
 
yep, tapered off after that but didn't get a torque curve unfortunately, which would have been real world.
i think its still gasping for air thru the standard air filter.....has the gutted Norton mufflers & the de-cat intermediate pipes.
 
Had a power commander fitted to mine and got very good results, same as you it gave the bike so much better fuelling for a smooth ride. 82 HP at 7574 RPM max which is only about 1HP up from standard but the ride is much better. The torque is a nice flat line. Also fitted a BMC air filter for better inflow they make a replacement filter to fit
 
Can you tell us about the BMC air filter. Sounds like a success ! I looked at the RG website and what I see is a flat panel filter. Are you cutting the air box to fit a panel filter ?
 
Last edited:

Similar threads

DBT
Power Commander connections
Replies
5
Views
1,676
TonyA
TonyA
Back
Top